Lewitt BEATKIT PRO 7 Piece Review (2026): A Spec-Based Look

What stands out

• Kick drum microphone with two phase-aligned dynamic and condenser capsules
• Snare microphone optimized for lively and punchy sound
• Three toms with supercardioid pickup patterns for isolation
• Two overhead microphones with excellent transient response and selectable characteristics

Who it fits

Lewitt BEATKIT PRO Key Specs

Piece Count: 7-Piece

This count tells you how many microphones are in the box. You get one for the kick, one for the snare, three for toms, and two overheads. This covers a standard acoustic kit completely. For electronic drum setups, you might only need the kick and snare mics. The extra toms and overheads offer flexibility if you expand your acoustic rig later.

Kick Drum: DTP 640 REX with two phase-aligned capsules

This mic uses both dynamic and condenser elements in one unit. The phase alignment ensures the sounds combine cleanly without cancellation. You get a full, punchy low end. This is useful for capturing the thump of a kick pad. It simplifies your setup by needing only one mic for the bass drum instead of multiple pieces.

Snare: MTP 440 DM

This microphone is tuned for a lively and punchy snare sound. It captures the crack and stick attack clearly. You will hear the rim shots and ghost notes distinctly. This helps when recording or triggering electronic samples from an acoustic snare. It ensures your backbeat cuts through the mix with clarity and presence.

Toms: DTP 340 TT with supercardioid pattern

The supercardioid pickup pattern rejects sound from the rear and sides. This reduces bleed from cymbals and other drums. You get a clean, accurate tom sound. This is vital for electronic drum triggers to avoid false triggers. It helps isolate each tom so your electronic pads respond only to the intended hit.

Overheads: LCT 140 AIR stereo set

These two mics provide stereo imaging for the entire kit. They feature excellent transient response for fast cymbal hits. You get a wide, natural soundstage. This is important for capturing the wash of cymbals and the overall kit balance. It helps you record realistic drum sounds that translate well to electronic triggers.

Design and build specs

The Lewitt BEATKIT PRO is a 7-piece microphone set. It includes specific mics for kick, snare, toms, and overheads. The listing lists the color as black. This is a standard finish for studio gear. It helps the equipment blend into most recording environments. You do not need to worry about bright colors distracting you during sessions.

The physical dimensions are important for storage and transport. The listing states the width is 18.5 inches. The height is 6.95 inches. The length is 20.4 inches. These measurements describe the packaging or the bundled components. You can use these numbers to check if the kit fits in your current gear bags. It ensures you have enough space in your studio rack or on your desk.

The kit comes with mounts, clamps, and windshields. This means you do not need to buy separate stands for each microphone. The layout is designed for a standard acoustic drum kit. Each microphone has a specific role. The kick mic has two capsules. The snare mic is dynamic. The toms use supercardioid patterns. The overheads are stereo pairs. This design lets you capture a full drum sound accurately. You get all the parts needed for a complete setup right away.

Setup and everyday use

You get all necessary mounting hardware with this kit. The listing includes microphone mounts, windshields, and clamps. This means you do not need to buy separate stands or accessories to begin recording. The physical dimensions of the packaging are 18.5 inches wide, 20.4 inches long, and 6.95 inches high. You should ensure your storage space can accommodate these measurements. The set is designed for straightforward installation on standard acoustic drum kits. You place the DTP 640 REX inside the kick drum. It uses two phase-aligned capsules, a dynamic one and a condenser one. This dual-capsule design helps capture low-end frequencies accurately without needing complex EQ adjustments later. The MTP 440 DM sits over the snare. Its specification highlights a lively and punchy sound character. You position the three DTP 340 TT mics on the toms. Their supercardioid pattern rejects sound from the rear. This helps isolate each tom and prevents bleed from the cymbals. You set up the two LCT 140 AIR microphones above the kit. They offer two selectable sound characteristics. This allows you to switch between different tonal profiles depending on your genre. The excellent transient response ensures fast attack notes are captured clearly. Daily use involves swapping these mics between kits if you play different drums. The black finish is standard and practical for studio environments. You simply plug the mics into your audio interface. The included clamps secure them firmly. This setup provides a consistent recording workflow for electronic drum production or acoustic recording.

Before you buy this kit

You need an audio interface or recording device to use these microphones. The Lewitt BEATKIT PRO captures acoustic sound, not electronic triggers. Check your interface for phantom power if you use the condenser capsules in the kick and overhead mics. The DTP 640 REX combines dynamic and condenser elements, so ensure your inputs support this hybrid setup. Keep the included windshields clean to maintain transient response. Store the clamps and mounts properly to avoid loss. This kit sits alongside electronic drum sets in your studio, offering a high-fidelity alternative for acoustic recording. It does not replace e-drums but complements them. If you record live kits, this seven-piece set covers all components. Verify your cable length needs before purchasing. The packaging dimensions are substantial, so plan your storage space. This is a professional tool for accurate sound capture, not a toy.

Check before you buy

• Confirm your interface supports phantom power for condenser capsules.
• Check if you have enough XLR cables for seven mics.
• Ensure you have space for the 18.5-inch packaging.
• Verify compatibility with your recording software inputs.
• Plan storage for the included mounts and clamps.

The product at a glance

1

Lewitt BEATKIT PRO 7-Piece Drum Mic Kit

Best for: Acoustic drum recording setups

Color

Black

Piece Count

7-Piece

Dimensions

20.4 × 18.5 × 6.95 inches

View on Amazon: Lewitt BEATKIT PRO 7-Piece Drum Mic Kit Affiliate link

This 7-piece microphone kit covers a full drum kit setup. It includes one kick drum mic with two phase-aligned capsules, one snare mic, three tom mics, and two overhead mics. The set weighs 18.5 inches wide and 20.4 inches long. You get mounts, windshields, and clamps included. It suits drummers who need a complete, dedicated mic solution for recording.

Pros

• Kick drum mic features dynamic and condenser capsules
• Includes three supercardioid tom microphones
• Overhead set offers two sound characteristics
• Mounts and clamps included in the box

Cons

• No wireless connectivity mentioned in specs
• No integrated digital effects or processing
• Requires external audio interface for use

Good fit if

• You need a dedicated mic for each drum piece
• You want separate mics for kick, snare, toms, and overheads
• You prefer wired connections for studio recording

Skip if

• You want a single all-in-one electronic drum pad
• You need wireless microphone capability
• You are looking for a drum kit with built-in sounds

Verdict: Lewitt BEATKIT PRO 7 Piece Drum Mic Kit is a complete wired solution for drummers who want dedicated microphones for every piece of their acoustic kit. It fits players who prioritize separate, high-quality capture over convenience.

Specifications side by side

Frequently asked questions

See also

• lewitt beatkit pro 7 piece alternatives
• best electronic drum sets under 200
• ukein pro luggage sets 7 piece review
• ailismail 7 piece outdoor review